Save Money – $100 dollars a Month
Convert your water cooler to a No-Bottle Water Cooler.
Bottleless or Bottle Free Water Cooler
The conversion kit contains the following stuff:
|
Solenoid Valve |
Water level switch |
|
On/off switch |
2 – 1/4″ to male pipe adapters |
|
1/4″ Union T |
1 – 1/4″ to male pipe elbow adapters |
|
1/4″ union coupling |
1/4″ valve |
|
10″ Black and white wires |
With connectors |
|
2′ of 1/4″ hose |
1/4″ union elbow |
|
Install Instructions |
Pictures |
To be sure this kit or which kit you need, please read the following.
First
To check if either of these kits will work for you, please determine if you have the rim with a funnel. The kit uses a 3†disc to hold the water inlet and water level switch.
Please study the following pictures.
If this kit will not work for you and you would like to convert your water cooler to a bottle free or a no-bottle water cooler, sometimes referred to as a Bottle Free Water cooler, I will help you with a solution. Please contact me using the contact page on my web site at lukeup.com and I will send you a link to forward me some pictures of your cooler. We will figure out a way to convert your cooler. No guarantees.
Also, if your water cooler does not have power, you can hook this kit up directly to a power cord and you’ll never have to refill a bottle again.
Second
If you can determine whether or not you need an extra switch, you can buy a kit that does not include an on/off switch. First unplug your water cooler and remove the back cover. Trace the black wire from the power cord to the on/off switch.
You need to be sure that you can find the wire that is on the heater or cooler side of the black wire. The black wire coming from the power cord may change into another color wire going to the switch. My cooler black wire was spliced to a red wire that went to the hot and cold switches.
If you can trace one of the other two wires to hook to, you do not need the kit that includes the switch. The arrow is pointing to the wires that can be used.
I have taken this conversion kit off because I cannot provide support any longer. There are too many different water coolers to cover with one kit. I will try to help you convert your cooler the best I can. All of the parts can be found on Amazon. I apologize for any inconvenience. Thanks.
Conversion Kit With a Switch – $58 + Shipping
Conversion Kit Without a Switch – $50 + Shipping
View Complete Installation Instructions
Please leave questions and comments below: